Intel D845GBV Intel Desktop Boards D845RG/D845BV Product Guide English - Page 50
Primary/Secondary IDE Master/Slave Submenus, Advanced, Table 14.
View all Intel D845GBV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Intel Desktop Boards D845GRG and D845GBV Product Guide Primary/Secondary IDE Master/Slave Submenus Maintenance Main Advanced Security PCI Configuration Boot Configuration Peripheral Configuration IDE Configuration Diskette Configuration Event Log Configuration Video Configuration USB Configuration Chipset Configuration Power Boot Exit ➜ Primary IDE Master Primary IDE Slave Secondary IDE Master Secondary IDE Slave There are four IDE submenus: Primary master, primary slave, secondary master, and secondary slave. Table 14 shows the format of these IDE submenus. For brevity, only one example is shown. Table 14. Primary/Secondary IDE Master/Slave Submenus Feature Drive Installed Type Maximum Capacity Options None • Auto (default) • User None Description Displays the type of drive installed. Specifies the IDE configuration mode for IDE devices. Auto fills-in capabilities from ATA/ATAPI device. User allows capabilities to be changed. Displays the capacity of the drive. LBA Mode Control (Note) None Specifies LBA mode control. Block Mode PIO Mode (Note) Ultra DMA Cable Detected (Note) • Disabled • 2 Sectors • 4 Sectors • 8 Sectors • 16 Sectors (default) • Auto (default) • 0 • 1 • 2 • 3 • 4 • Disabled (default) • Mode 0 • Mode 1 • Mode 2 • Mode 3 • Mode 4 • Mode 5 None Specifies number of sectors per block for transfers from the hard disk drive to memory. Check the hard disk drive's specifications for optimum setting. Specifies the PIO mode. Specifies the Ultra DMA mode for the drive. Displays the type of cable connected to the IDE interface: 40-conductor or 80-conductor (for ATA-66/100 devices). Note: These configuration options appear only if an IDE device is installed. 50