Intel D845PEMY Product Guide - Page 9

1 Desktop Board Features Table 1 describes the major features of Intel® Desktop Board D845PEMY. Table 1. Feature Summary Form Factor Processor Memory Chipset Audio LAN I/O Control Expansion Capabilities Peripheral Interfaces BIOS Power Management MicroATX at 9.2 inches by 8.6 inches Support for: • Intel® Pentium® 4 processor in an mPGA-478 socket with a 533/400 MHz system bus • Intel® Celeron® D processor in an mPGA-478 socket with a 533 MHz system bus • Intel Celeron processor in an mPGA-478 socket with a 400 MHz system bus • Two 184-pin DDR SDRAM DIMM sockets, 2.5 V • Support for DDR333/266 MHz DIMMs • Supports up to 2 GB of system memory with DIMMs utilizing 512 Mbit technology DRAM devices Intel® 845PE chipset, consisting of: • Intel® 82845PE Memory Controller Hub (MCH) • Intel® 82801DB I/O Controller Hub (ICH4) • 3 Mbit Firmware Hub (FWH) • Intel 845PE chipset (AC '97) • Realtek* ALC202A codec Intel® 82562ET 10/100 Mbit/sec Platform LAN Connect (PLC) device and RJ-45 connector SMSC LPC47M172 low pin count (LPC) interface I/O controller Three PCI slots • Up to four USB 2.0 ports ⎯ Two ports routed to the back panel ⎯ Two ports routed to the USB 2.0 header • Two IDE interfaces with Ultra DMA-33 and ATA-66/100 support • One diskette drive interface • One parallel port • One serial port • PS/2* keyboard and mouse ports • Intel/AMI BIOS • Intel® Rapid BIOS Boot • Intel® Express BIOS Update • SMBIOS support • Support for Advanced Configuration and Power Interface (ACPI) • Hardware support for power, fan, and chassis intrusion connectors, Suspend to RAM, wake from USB and PS/2 keyboard and mouse, and PME# wakeup. 9