Intel D850EMD2 Product Guide - Page 17
RJ-45 LAN Connector LEDs, Speaker, Battery, Power Management Features
View all Intel D850EMD2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Desktop Board Features RJ-45 LAN Connector LEDs Two LEDs are built into the RJ-45 LAN connector. Table 3 describes the LED states when the board is powered up and the LAN subsystem is operating. Table 3. RJ-45 LAN Connector LEDs LED Color Green Yellow LED State Off On Off On (steady state) On (brighter and pulsing) Indicates 10 Mbit/sec data rate is selected. 100 Mbit/sec data rate is selected. LAN link is not established. LAN link is established. The computer is communicating with another computer on the LAN. Speaker A 47 Ω inductive speaker is mounted on the desktop board. The speaker provides audible error code (beep code) information during the Power-On Self-Test (POST). Battery A battery on the desktop board keeps the values in CMOS RAM and the clock current when the computer is turned off. See Chapter 2 on page 21 for instructions on how to replace the battery. Power Management Features Power management is implemented at several levels, including: • Software support: Advanced Configuration and Power Interface (ACPI) Advanced Power Management (APM) • Hardware support: Instantly Available technology Resume on Ring Wake from USB Wake from PS/2 keyboard PCI card wakeup support If the desktop board is used with an ACPI-aware operating system, the BIOS can provide ACPI support. Otherwise, it defaults to APM support. 17