Intel D850EMV2 Product Specification - Page 33
Audio Connectors, Audio Subsystem Software
View all Intel D850EMV2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Product Description 1.10.1 Audio Connectors 1.10.1.1 Front Panel Audio Connector A 2 x 5-pin connector provides mic in and line out signals for front panel audio connectors. For information about The location of the connector The signal names of the front panel audio connector Refer to Section 2.8.3, page 70 Table 44, page 71 ✏ NOTE The front panel audio connector is alternately used as a jumper block for routing audio signals. Refer to Section 2.9.1 on page 74 for more information. 1.10.1.2 Auxiliary Line In Connector A 1 x 4-pin ATAPI-style connector connects the left and right channel signals of an internal audio device to the audio subsystem. For information about The location of the auxiliary line in connector The signal names of the auxiliary line in connector Refer to Figure 13, page 58 Table 29, page 59 1.10.1.3 ATAPI CD-ROM Audio Connector A 1 x 4-pin ATAPI-style connector connects an internal ATAPI CD-ROM drive to the audio mixer. For information about The location of the ATAPI CD-ROM connector The signal names of the ATAPI CD-ROM connector Refer to Figure 13, page 58 Table 30, page 59 1.10.2 Audio Subsystem Software Audio software and drivers are available from Intel's World Wide Web site. For information about Obtaining audio software and drivers Refer to Section 1.3, page 18 33