Intel D850EMV2 Product Guide - Page 30

Setting the BIOS Configuration Jumper

Get Intel D850EMV2 PDF manuals and user guides View all Intel D850EMV2 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 30 highlights

Intel Desktop Boards D850EMD2 and D850EMV2 Product Guide Setting the BIOS Configuration Jumper CAUTION Always turn off the power and unplug the power cord from the computer before changing the jumper. Moving the jumper with the power on may result in unreliable computer operation. The location of the board's BIOS configuration jumper (J9H2) is shown in Figure 14. 1 3 J9H2 OM13627 Figure 14. Location of the BIOS Configuration Jumper The three-pin BIOS jumper enables the board configuration to be done in BIOS Setup. Table 5 shows the jumper settings for the Setup program modes. Table 5. Jumper Settings for the BIOS Setup Program Modes (J9H2) Function / Mode Normal Configure Recovery Jumper Setting 1-2 1 3 2-3 1 3 None 1 3 Configuration The BIOS uses current configuration information and passwords for booting. After the POST runs, the BIOS displays the maintenance menu. Use this menu to clear passwords. The BIOS attempts to recover the BIOS configuration. A recovery diskette is required. 30

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
Intel Desktop Boards D850EMD2 and D850EMV2 Product Guide
30
Setting the BIOS Configuration Jumper
CAUTION
Always turn off the power and unplug the power cord from the computer before changing the
jumper.
Moving the jumper with the power on may result in unreliable computer operation.
The location of the board’s BIOS configuration jumper (J9H2) is shown in Figure 14.
OM13627
3
J9H2
1
Figure 14.
Location of the BIOS Configuration Jumper
The three-pin BIOS jumper enables the board configuration to be done in BIOS Setup.
Table 5
shows the jumper settings for the Setup program modes.
Table 5.
Jumper Settings for the BIOS Setup Program Modes (J9H2)
Function / Mode
Jumper Setting
Configuration
Normal
1-2
3
1
The BIOS uses current configuration information and passwords
for booting.
Configure
2-3
3
1
After the POST runs, the BIOS displays the maintenance menu.
Use this menu to clear passwords.
Recovery
None
3
1
The BIOS attempts to recover the BIOS configuration.
A
recovery diskette is required.