Intel D850GB Intel Desktop Board D850GB/D850GBAL Product Guide English - Page 14
USB Support, PCI Enhanced IDE Interface, Expansion Slots - drivers
View all Intel D850GB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Intel Desktop Board D850GB/D850GBAL Product Guide USB Support The board has two USB ports. Two additional ports may be connected to a header on the board. You can connect two USB peripheral devices directly to the computer without an external hub. To attach more than two devices, connect an external hub to either of the built-in ports. The board supports the standard universal host controller interface (UHCI) and takes advantage of standard software drivers written to be compatible with UHCI. ✏ NOTE Computer systems that have an unshielded cable attached to a USB port might not meet FCC Class B requirements, even if no device or a low-speed USB device is attached to the cable. Use a shielded cable that meets the requirements for a full-speed USB device. PCI Enhanced IDE Interface The ICH2's IDE interface handles the exchange of information between the processor and peripheral devices like hard disks, CD-ROM drives, and Iomega Zip† drives inside the computer. The interface supports: • Up to four IDE devices (such as hard drives) • ATAPI devices (such as CD-ROM drives) • PIO Mode 3 and PIO Mode 4 devices • Ultra ATA-66/100 protocols • Support for laser servo (LS-120) drives Expansion Slots The board has: • Five PCI bus add-in card connectors • One AGP connector • One CNR connector shared with PCI slot 5 (D850GB only) 14