Intel D865PERL Intel Desktop Board D865PERL Product Guide - Page 58
Setting the BIOS Configuration Jumper Block, Table 13. - bios recovery
View all Intel D865PERL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Intel Desktop Board D865PERL Product Guide Setting the BIOS Configuration Jumper Block CAUTION Always turn off the power and unplug the power cord from the computer before changing the jumper. Moving the jumper with the power on may result in unreliable computer operation. The location of the desktop board's BIOS configuration jumper is shown in Figure 18. 1 3 J7H2 OM15483 Figure 18. Location of the BIOS Configuration Jumper Block The three-pin BIOS jumper block enables all board configurations to be done in BIOS Setup. Table 13 shows the jumper settings for the Setup program modes. Table 13. Jumper Settings for the BIOS Setup Program Modes (J7H2) Jumper Setting 1 Mode Normal (default) (1-2) Description The BIOS uses the current configuration and passwords for booting. 3 Configure (2-3) After the Power-On Self-Test (POST) runs, the BIOS 1 displays the Maintenance Menu. Use this menu to clear 3 passwords. Recovery (None) The BIOS recovers data from a recovery diskette in the 1 event of a failed BIOS update. 3 58