Intel D915GAG User Manual - Page 17
Main Memory - ram
View all Intel D915GAG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Desktop Board Features Main Memory NOTE To be fully compliant with all applicable Intel® SDRAM memory specifications, the board should be populated with DIMMs that support the Serial Presence Detect (SPD) data structure. If your memory modules do not support SPD, you will see a notification to this effect on the screen at power up. The BIOS will attempt to configure the memory controller for normal operation. The desktop board supports dual or single channel memory configurations. Desktop boards D915GAV and D915GAG support dual or single channel memory configurations defined in Table 5. Table 5. Desktop Board D915GAV/D915GAG Memory Configurations Memory Speed DDR 400 Processor Pentium 4 processor DDR 333 Pentium 4 processor FSB frequency (MHz) 800 533 800 533 Memory Speed Outcome (MHz) 400 400 333 333 Desktop boards D915GAV and D915GAG support: • Four 184-pin Double Data Rate (DDR) SDRAM Dual Inline Memory Module (DIMMs) connectors with gold-plated contacts • Unbuffered, non-registered single or double-sided DIMMs • Serial Presence Detect (SPD) memory only • Non-ECC RAM • 2.5 V memory • Memory configuration listed below: ⎯ Up to 1.0 GB utilizing 128 Mb technology ⎯ Up to 2.0 GB utilizing 256 Mb technology ⎯ Up to 4.0 GB utilizing 512 Mb or 1 GB technology 17