Intel D915GMHLK Product Guide - Page 32
Installing and Removing a Processor
![]() |
UPC - 675900588202
View all Intel D915GMHLK manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Intel Desktop Board D945GNT/D945GTP Product Guide Installing and Removing a Processor Instructions on how to install a processor to the desktop board are given below. Installing a Processor CAUTION Before installing or removing a processor, make sure the AC power has been removed by unplugging the power cord from the computer; the standby power LED should not be lit (see Figure 4 on page 24). Failure to do so could damage the processor and the board. To install a processor, follow these instructions: 1. Observe the precautions in "Before You Begin" on page 27. 2. Open the socket lever by pushing the lever down and away from the socket (see Figure 7, A and B). A B OM17210 Figure 7. Lift Socket Lever 3. Lift the load plate. Do not touch the socket contacts (see Figure 8, C and D) C D D OM17211 Figure 8. Lift the Load Plate and Don't Touch the Socket Contacts 32
![](/manual_guide/products/intel-d915gmhlk-product-guide-274695a/32.png)