Intel D925XEBC2LK Product Specification - Page 104
Table 48., BIOS Error Messages
UPC - 735858171151
View all Intel D925XEBC2LK manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 104 highlights
Intel Desktop Boards D925XECV2/D925XEBC2 Technical Product Specification Table 48. BIOS Error Messages (continued) Error Message Explanation Update OK! NVRAM was invalid and has been updated. Updated Failed NVRAM was invalid but was unable to be updated. Keyboard Error Error in the keyboard connection. Make sure keyboard is connected properly. KB/Interface Error Keyboard interface test failed. Memory Size Decreased Memory size has decreased since the last boot. If no memory was removed then memory may be bad. Memory Size Increased Memory size has increased since the last boot. If no memory was added there may be a problem with the system. Memory Size Changed Memory size has changed since the last boot. If no memory was added or removed then memory may be bad. No Boot Device Available System did not find a device to boot. Off Board Parity Error A parity error occurred on an off-board card. This error is followed by an address. On Board Parity Error A parity error occurred in onboard memory. This error is followed by an address. Parity Error A parity error occurred in onboard memory at an unknown address. NVRAM/CMOS/PASSWORD cleared by NVRAM, CMOS, and passwords have been cleared. The system Jumper should be powered down and the jumper removed. Pressed CMOS is ignored and NVRAM is cleared. User must enter Setup. 104