Intel D945PLNM English Product Guide - Page 46

Setting the BIOS Configuration Jumper

Get Intel D945PLNM PDF manuals and user guides View all Intel D945PLNM manuals
Add to My Manuals
Save this manual to your list of manuals

Page 46 highlights

Intel Desktop Board D945PLNM Product Guide Setting the BIOS Configuration Jumper NOTE Always turn off the power and unplug the power cord from the computer before moving the jumper. Moving the jumper with the power on may result in unreliable computer operation. Figure 25 shows the location of the desktop board's BIOS configuration jumper block. 3 21 OM19094 Figure 25. Location of the BIOS Configuration Jumper Block The three-pin BIOS jumper block enables all board configurations to be done in the BIOS Setup program. Table 10 shows the jumper settings for the BIOS Setup program modes. Table 10. Jumper Settings for the BIOS Setup Program Modes Jumper Setting Mode Normal (default) (1-2) 3 1 Description The BIOS uses the current configuration and passwords for booting. 3 1 Configure (2-3) After the Power-On Self-Test (POST) runs, the BIOS displays the Maintenance Menu. Use this menu to clear passwords. 3 1 Recovery (None) The BIOS recovers data in the event of a failed BIOS update. 46

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
Intel Desktop Board D945PLNM Product Guide
46
Setting the BIOS Configuration Jumper
NOTE
Always turn off the power and unplug the power cord from the computer before moving the jumper.
Moving the jumper with the power on may result in unreliable computer operation.
Figure 25 shows the location of the desktop board’s BIOS configuration jumper block.
OM19094
1
2
3
Figure 25.
Location of the BIOS Configuration Jumper Block
The three-pin BIOS jumper block enables all board configurations to be done in the BIOS Setup
program.
Table 10 shows the jumper settings for the BIOS Setup program modes.
Table 10.
Jumper Settings for the BIOS Setup Program Modes
Jumper Setting
Mode
Description
1
3
Normal (default) (1-2)
The BIOS uses the current configuration and passwords for
booting.
1
3
Configure (2-3)
After the Power-On Self-Test (POST) runs, the BIOS
displays the Maintenance Menu.
Use this menu to clear
passwords.
1
3
Recovery (None)
The BIOS recovers data in the event of a failed BIOS
update.