Intel D945PLRN English Product Guide - Page 40
Connecting USB 2.0 Headers, Connecting the Front Panel Header
View all Intel D945PLRN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Intel Desktop Board D945PLRN Product Guide Connecting USB 2.0 Headers Before connecting the USB 2.0 headers, observe the precautions in "Before You Begin" on page 23. See Figure 18, D on page 38 for the location of the black USB 2.0 headers. Table 8 shows the pin assignments for the USB 2.0 headers. Table 8. USB 2.0 Header Signal Names USB Port A Pin Signal name 1 Power 3 D- 5 D+ 7 Ground 9 Key Note: USB ports may be assigned as needed. USB Port B Pin Signal name 2 Power 4 D- 6 D+ 8 Ground 10 No connect Connecting the Front Panel Header Before connecting the front panel header, observe the precautions in "Before You Begin" on page 23. See Figure 18, C on page 38 for the location of the multi-colored front panel header. Table 9 shows the pin assignments for the front panel header. Table 9. Front Panel Header Signal Names Pin Signal In/Out Description Pin Signal In/Out Description Hard Drive Activity LED (Orange) Power LED (Green) 1 HD_PWR Out Hard disk LED pull- 2 HDR_BLNK_GRN Out Front panel green up (330 Ω) to +5 V LED 3 HDA# Out Hard disk active LED 4 HDR_BLNK_YEL Out Front panel yellow LED Reset Switch (Purple) On/Off Switch (Red) 5 Ground 7 FP_RESET# In Ground Reset switch 6 SWITCH_ON# In 8 Ground Power switch Ground 9 N/C Not connected 10 No pin No pin 40