Intel DH61AG Technical Product Specification - Page 43
WAKE# Signal Wake-up Support - cir
View all Intel DH61AG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Product Description 1.13.2.3 LAN Wake Capabilities LAN wake capabilities enable remote wake-up of the computer through a network. The LAN subsystem monitors network traffic at the Media Independent Interface. Upon detecting a Magic Packet* frame, the LAN subsystem asserts a wake-up signal that powers up the computer. 1.13.2.4 Instantly Available PC Technology Instantly Available PC technology enables the board to enter the ACPI S3 (Suspend-toRAM) sleep-state. While in the S3 sleep-state, the computer will appear to be off (the power supply is off, and the front panel LED is amber if dual colored, or off if single colored.) When signaled by a wake-up device or event, the system quickly returns to its last known wake state. Table 12 on page 41 lists the devices and events that can wake the computer from the S3 state. The use of Instantly Available PC technology requires operating system support and drivers for any installed PCI Express add-in card. 1.13.2.5 Wake from USB USB bus activity wakes the computer from an ACPI S3 state. NOTE Wake from USB requires the use of a USB peripheral that supports Wake from USB. 1.13.2.6 WAKE# Signal Wake-up Support When the WAKE# signal on the PCI Express bus is asserted, the computer wakes from an ACPI S3, S4, or S5 state. 1.13.2.7 Wake from Consumer IR CIR activity wakes the computer from an ACPI S3, S4, or S5 state. 1.13.2.8 Wake from S5 When the RTC Date and Time is set in the BIOS, the computer will automatically wake from an ACPI S5 state. 43