Intel DP43BFL Product Guide - Page 18
LAN Subsystem, LAN Status LEDs, Table 4. LAN Connector LEDs - dp43bf drivers
View all Intel DP43BFL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Intel Desktop Board DP43BF Product Guide LAN Subsystem The LAN subsystem includes: • Intel ICH10R • Broadcom NetLink BCM5788 Gigabit (10/100/1000 Mb/s) Ethernet LAN controller • RJ-45 LAN connector with integrated status LEDs The subsystem features: • CSMA/CD protocol engine • LAN connect interface between ICH10R and the controller • PCI Express power management Two LEDs are built into the RJ-45 LAN connector located on the back panel (see Figure 2). These LEDs indicate the operating states of the LAN. Figure 2. LAN Status LEDs Table 4 describes the LED states when the board is powered up and the LAN subsystem is operating. Table 4. LAN Connector LEDs LED A (Link) B (Speed) LED Color Green N/A Green Yellow LED State Off On Blinking Off On On Indicates LAN link is not established LAN link is established LAN activity is occurring 10 Mb/s data rate 100 Mb/s data rate 1000 Mb/s data rate For information about LAN software and drivers go to http://www.intel.com/support/motherboards/desktop 18