Intel DP55WG Product Guide - Page 19
Legacy I/O, Expandability, BIOS, Serial ATA Auto Configuration, PCI Express* Auto Configuration - bios update
UPC - 735858206037
View all Intel DP55WG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Desktop Board Features Legacy I/O Intel Desktop Board DP55WG includes an I/O controller that provides the following legacy I/O features: • Consumer Infrared (CIR) support • Low pin count (LPC) interface • Intelligent power management, including a programmable wake up event interface • PCI power management support Expandability Intel Desktop Board DP55WG provides the following expansion capability: • One PCI Express 2.0 x16 port (x8/x16 electrical) • One PCI Express 2.0 x8 port (x8 electrical; x16 compatible) • One PCI Express 2.0 x4 port (x4 electrical; x16 compatible) • Two PCI Express 2.0 x1 ports • Two PCI bus connectors BIOS The BIOS provides the Power-On Self-Test (POST), the BIOS Setup program, and the PCI/PCI Express and SATA auto-configuration utilities. The BIOS is stored in a Serial Peripheral Interface (SPI) Flash device. The BIOS can be updated by following the instructions in Chapter 3 starting on page 65. Serial ATA Auto Configuration If you install a Serial ATA device (such as a hard drive) in your computer, the autoconfiguration utility in the BIOS automatically detects and configures the device for your computer. You do not need to run the BIOS Setup program after installing a Serial ATA device. You can override the auto-configuration options by specifying manual configuration in the BIOS Setup program. PCI Express* Auto Configuration If you install a PCI Express add-in card in your computer, the PCI Express autoconfiguration utility in the BIOS automatically detects and configures the resources (IRQs, DMA channels, and I/O space) for that add-in card. You do not need to run the BIOS Setup program after you install a PCI Express add-in card. 19