Intel DQ35MP Product Specification - Page 15

Product Description 1.2 Legacy Considerations This board differs from other Intel® Desktop Board products, with specific changes including (but not limited to) the following: • No parallel port • No floppy drive connector • No PS/2 ports for mouse and keyboard • No serial port on the back panel • The serial port header is located near the memory sockets and may require a specialized chassis or cabling solution to use 1.3 Online Support To find information about... Intel Desktop Board DQ35MP Desktop Board Support Available configurations for the Desktop Board DQ35MP Supported processors Chipset information BIOS and driver updates Tested Memory Visit this World Wide Web site: http://www.intel.com/products/motherboard/DQ35MP/index.htm http://support.intel.com/support/motherboards/desktop http://www.intel.com/products/motherboard/DQ35MP/index.htm http://www.intel.com/go/findcpu http://www.intel.com/products/desktop/chipsets/index.htm http://downloadcenter.intel.com http://support.intel.com/support/motherboards/desktop/sb/CS025414.htm 1.4 Processor The board is designed to support the following processors: • Intel Core 2 Quad processor in an LGA775 socket with a 1066 MHz system bus • Intel Core 2 Duo processor in an LGA775 socket with a 1333 MHz, 1066 MHz, or 800 MHz system bus • Intel Pentium Dual-Core processor in an LGA775 socket with an 800 MHz system bus • Intel Celeron processor 400 sequence in an LGA775 socket with an 800 MHz system bus Other processors may be supported in the future. This board is designed to support processors with a maximum wattage of 105 W. The processors listed above are only supported when falling within the wattage requirements of the DQ35MP board. See the Intel web site listed below for the most up-to-date list of supported processors. For information about... Supported processors Refer to: http://www.intel.com/go/findcpu 15