Intel DZ68BC Technical Product Specification - Page 57
Power Supply Connectors
View all Intel DZ68BC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Technical Reference 2.2.2.3 Power Supply Connectors The board has the following power supply connectors: • Main power - a 2 x 12 connector. This connector is compatible with 2 x 10 connectors previously used on Intel Desktop boards. The board supports the use of ATX12V power supplies with either 2 x 10 or 2 x 12 main power cables. When using a power supply with a 2 x 10 main power cable, attach that cable on the leftmost pins of the main power connector, leaving pins 11, 12, 23, and 24 unconnected. • Processor core power - a 2 x 4 connector. This connector provides power directly to the processor voltage regulator and must always be used. Failure to do so will prevent the board from booting. Table 26. Processor Core Power Connector Pin Signal Name Pin Signal Name 1 Ground 3 Ground 5 Ground 2 +12 V 4 +12 V 6 +12 V 7 Ground 8 +12 V Table 27. Main Power Connector Pin Signal Name 1 +3.3 V Pin Signal Name 13 +3.3 V 2 +3.3 V 14 -12 V 3 Ground 15 Ground 4 +5 V 5 Ground 16 PS-ON# (power supply remote on/off) 17 Ground 6 +5 V 18 Ground 7 Ground 19 Ground 8 PWRGD (Power Good) 20 No connect 9 +5 V (Standby) 21 +5 V 10 +12 V 11 +12 V (Note) 12 2 x 12 connector detect (Note) 22 +5 V 23 +5 V (Note) 24 Ground (Note) Note: When using a 2 x 10 power supply cable, this pin will be unconnected. For information about Power supply considerations Refer to Section 2.5.1 on page 64 57