Intel Deployment IDA 5.0 User Guide - Page 48

Get Updated Drivers, From my network, From USB Disk on Key or Hard Drive, Choose Drivers to Install - assistant cd

Page 48 highlights

Intel® Deployment Assistant v5.0 User Guide Enter the network configuration settings for the onboard network adapters that will be detected by the Operating System during installation. Note: These settings will not affect the network settings for the BMC. Intel® recommends that you set different IP addresses for the Operating System and BMC. The "network interface" column lists each network adapter detected by the Intel® Deployment Assistant. Your Operating System may have a different name after you install the Operating System. Get Updated Drivers This section allows you to select the source that IDA can download serve drivers packages. Those drivers will be automatically installed to OS by IDA. Choose one of the following options: From http://www.intel.com/support To get the latest drivers from the Intel® support website by select this option. Please check that the server is only connected to one network during the download. You can get the last Intel® server drivers but you need to consider that will spend a long time if internet speed is low. From Intel® Deployment Assistant CD Directly use the driver packages that store in IDA CD. Although IDA CD probably did not contain the last driver packages, this option is the fastest. IDA selects this option as default choice. From my network IDA can download a driver package stored on a network share folder. You need to manually download the latest drivers from http://downloadcenter.intel.com website and copy it to your network share. From USB Disk on Key or Hard Drive IDA can get the drivers stored on a USB key or USB hard disk drive. You need to manually download the latest drivers from http://downloadcenter.intel.com website and copy to USB key. Choose Drivers to Install IDA shows all available drivers that downloaded from the driver source. Uncheck the drivers that you don't want to install. But if you want to install an OS on a RAID volume, you can deselect the driver for the appropriate RAID controller. The path to the selected drivers will be stored and will then be used to download and install the drivers during the Operating System installation. 39

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96

Intel
®
Deployment Assistant v5.0 User Guide
39
Enter the network configuration settings for the onboard network adapters that
will be detected by the Operating System during installation.
Note
: These settings will not affect the network settings for the BMC. Intel
®
recommends that you set different IP addresses for the Operating System
and BMC.
The "network interface" column lists each network adapter detected by the
Intel
®
Deployment Assistant. Your Operating System may have a different name
after you install the Operating System.
Get Updated Drivers
This section allows you to select the source that IDA can download serve drivers
packages. Those drivers will be automatically installed to OS by IDA.
Choose one of the following options:
From
To get the latest drivers from the Intel
®
support website by select this option.
Please check that the server is only connected to one network during the
download.
You can get the last Intel
®
server drivers but you need to consider that will
spend a long time if internet speed is low.
From Intel
®
Deployment Assistant CD
Directly use the driver packages that store in IDA CD. Although IDA CD probably
did not contain the last driver packages, this option is the fastest. IDA selects
this option as default choice.
From my network
IDA can download a driver package stored on a network share folder. You need
to manually download the latest drivers from
website and copy it to your network share.
From USB Disk on Key or Hard Drive
IDA can get the drivers stored on a USB key or USB hard disk drive. You need to
manually download the latest drivers from
website and copy to USB key.
Choose Drivers to Install
IDA shows all available drivers that downloaded from the driver source.
Uncheck the drivers that you don’t want to install. But if you want to install an
OS on a RAID volume, you can deselect the driver for the appropriate RAID
controller.
The path to the selected drivers will be stored and will then be used to download
and install the drivers during the Operating System installation.