Intel H2000JF Technical Product Specification - Page 39

Platform Management Functional Overview Intel® Server Board S2600JF TPS board and "SATA-1" on bridge board, and four 3Gb/s SATA ports routed from the SCU to the multi-drive port connector labeled "SAS/SATA 0-3" (grouped as SCU0). Note: The multi-drive port connector labeled "SAS/SATA 4-7" is NOT functional by default and is only enabled with the addition of an Intel® RAID C600 Storage Upgrade Key option supporting eight SAS/SATA ports. It supports the Serial ATA Specification, Revision 3.0, and several optional sections of the Serial ATA II: Extensions to Serial ATA 1.0 Specification, Revision 1.0 (AHCI support is required for some elements). Intel® Server Board S2600JF implements six SATA/SAS ports. The implementation is as follows: Table 9. Intel® Server Board S2600JF SATA/SAS port Port# 0 1 0 1 SCU0 2 3 Speed 6Gb/s SATA 6Gb/s SATA 3Gb/s SATA/SAS(non-AHCI) Connector Bridge Board Slot On Server board Bridge Board Slot There are two embedded software RAID options using the storage ports configured from the SCU only:  Intel® Embedded Server RAID Technology 2 (ESRT2) based on LSI* MegaRAID SW RAID technology supporting SATA RAID levels 0,1,10, 5  Intel® Rapid Storage Technology (RSTe) supporting SATA RAID levels 0,1,5,10 The server board is capable of supporting additional chipset embedded SAS and RAID options from the SCU controller when configured with one of several available Intel® RAID C600 Storage Upgrade Keys. Upgrade keys install onto a 4-pin connector on the server board labeled "STOR UPG Key". The following table identifies available upgrade key options and their supported features. Table 10. Intel® RAID C600 Storage Upgrade Key Options for S2600JF Intel® RAID C600 Upgrade Key Options (Intel® Product Codes) Default - No option key installed RKSATA4R5 RKSAS4 RKSAS4R5 Key Color NA Black Green Yellow Description 4 Port SATA with Intel® ESRT RAID 0,1,10, and Intel® RSTe RAID 0,1,5,10 4 Port SATA with Intel® ESRT2 RAID 0,1, 5, 10, and Intel® RSTe RAID 0,1,5,10 4 Port SAS with Intel® ESRT2 RAID 0,1, 10, and Intel® RSTe RAID 0,1,10 4 Port SAS with Intel® ESRT2 RAID 0,1, 5, 10, and Intel® RSTe RAID 0,1,10 Note: The eight-port Storage Upgrade Key can also implement the RAID function, but only four ports (SCU0) are user accessible on Intel® Server Board S2600JF. 26 Revision 1.3 Intel order number G31608-004