Intel H2000WP Technical Product Specification - Page 40
Stor Upg Key
View all Intel H2000WP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Product Architecture Overview Intel® Server Board S2600WP TPS Storage Upgrade Keys. Upgrade keys install onto a four-pin connector on the server board labeled STOR UPG Key. The following table identifies available upgrade key options and their supported features. Table 10. Intel® RAID C600-A Storage Upgrade Key Options for S2600WP Intel® RAID C600-A Upgrade Key Options (Intel® Product Codes) Default - No option key installed RKSATA4R5 RKSATA8 RKSATA8R5 RKSAS4 RKSAS4R5 RKSAS8 RKSAS8R5 Key Color N/A Black Blue White Green Yellow Orange Purple Intel® RAID C600-A Upgrade Key Description S2600WP SCU RAID availability Description 4 Port SATA with Intel® ESRT RAID 0,1,10 and Intel® RSTe RAID 0,1,5,10 4 Port SATA with Intel® ESRT2 RAID 0,1, 5, 10 and Intel® RSTe RAID 0,1,5,10 8 Port SATA with Intel® ESRT2 RAID 0,1, 10 and Intel® RSTe RAID 0,1,5,10 8 Port SATA with Intel® ESRT2 RAID 0,1, 5, 10 and Intel® RSTe RAID 0,1,5,10 4 Port SAS with Intel® ESRT2 RAID 0,1, 10 and Intel® RSTe RAID 0,1,10 4 Port SAS with Intel® ESRT2 RAID 0,1, 5, 10 and Intel® RSTe RAID 0,1,10 8 Port SAS with Intel® ESRT2 RAID 0,1, 10 and Intel® RSTe RAID 0,1,10 8 Port SAS with Intel® ESRT2 RAID 0,1, 5, 10 and Intel® RSTe RAID 0,1,10 4 Port SATA with Intel® ESRT RAID 0,1,10 and Intel® RSTe RAID 0,1,5,10 4 Port SATA with Intel® ESRT2 RAID 0,1, 5, 10 and Intel® RSTe RAID 0,1,5,10 4 Port SATA with Intel® ESRT2 RAID 0,1, 10 and Intel® RSTe RAID 0,1,5,10 4 Port SATA with Intel® ESRT2 RAID 0,1, 5, 10 and Intel® RSTe RAID 0,1,5,10 4 Port SAS with Intel® ESRT2 RAID 0,1, 10 and Intel® RSTe RAID 0,1,10 4 Port SAS with Intel® ESRT2 RAID 0,1, 5, 10 and Intel® RSTe RAID 0,1,10 4 Port SAS with Intel® ESRT2 RAID 0,1, 10 and Intel® RSTe RAID 0,1,10 4 Port SAS with Intel® ESRT2 RAID 0,1, 5, 10 and Intel® RSTe RAID 0,1,10 Note: The eight-port Storage Upgrade Key can also implement the RAID function for S2600WP, but only four ports (SCU0) can be configured as proper RAID level. SCU at ESRT2 mode supports Maximum drive = 8 (with or without SAS expander option installed) Additional information for the on-board RAID features and functionality can be found in the Intel® RAID Software Users Guide (Intel Document Number D29305). 3.4.5 PCI Interface The Intel® C600 PCH PCI Interface provides a 33MHz, Revision 2.3 implementation. It integrates a PCI arbiter that supports up to four external PCI bus masters in addition to the PCH internal requests. This allows for combinations of up to four PCI down devices and PCI slots. 3.4.6 Low Pin Count (LPC) Interface The Intel® C600-A PCH implements an LPC Interface as described in the LPC 1.1 Specification. The Low Pin Count (LPC) bridge function of the PCH resides in PCI Device 31:Function 0. In addition to the LPC bridge interface function, D31:F0 contains other functional units including DMA, interrupt controllers, timers, power management, system management, GPIO, and RTC. 28 Revision 1.2 Intel order number G44057-003