Intel NUC5i3MYHE User Guide - Page 3
Open the Intel NUC Chassis, Installing and Removing Memory, Install SO-DIMMs - drivers
View all Intel NUC5i3MYHE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
Intel NUC Kit NUC5i3MYHE & NUC5i5MYHE User Guide This guide tells you how to: • Install and remove memory • Install a wireless card • Install an M.2 SSD • Install a 2.5" drive • Install a VESA mount bracket • Install an operating system • Install the latest drivers Open the Intel NUC Chassis To open the Intel NUC chassis, follow these steps: 1. Unscrew the four corner screws on the bottom cover of the chassis and lift the cover. Installing and Removing Memory Intel NUC Kits NUC5i3MYHE and NUC5i5MYHE have two 204-pin DDR3L SO-DIMM sockets. Memory requirements: 1.35V low voltage memory 1333 MHz or 1600 MHz SO-DIMMs Non-ECC For a list of tested memory, go to the System Memory page on the Support site: Install SO-DIMMs If you plan to install just one SO-DIMM, install it in the lower memory socket. To install the SO-DIMMs, follow these steps: 1. Observe the precautions in "Before You Begin" on page 2. 3