Intel NUC5i5RYH User Guide - Page 3
Open the Intel NUC Chassis, Installing and Removing Memory, Install SO-DIMMs
View all Intel NUC5i5RYH manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
Intel NUC Kit DCCP847DYE User Guide This guide tells you how to: • Install and remove memory • Install a wireless card • Install an mSATA SSD • Install a VESA mount bracket • Install an operating system • Install the latest drivers Open the Intel NUC Chassis To open the Intel NUC chassis, follow these steps: 1. Unscrew the four corner screws on the bottom cover of the chassis and lift the cover. Installing and Removing Memory Intel NUC Kit DCCP847DYE has two 204-pin SO-DIMM sockets. Memory requirements: 1.5V DDR3 or 1.35V DDR3L (low voltage) memory 1333 MHz SO-DIMMs Non-ECC For a list of tested memory, go to the System Memory page on the Support site: Install SO-DIMMs If you plan to install just one SO-DIMM, install it in the lower memory socket. To install the SO-DIMMs, follow these steps: 1. Observe the precautions in "Before You Begin" on page 2. 3