Intel P4000RP Service Guide - Page 89
IntelR ESRT2 LSI, Not Installed
View all Intel P4000RP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
Server Utilities Command Queuing, Hot Plug, Staggered Spin Up). It uses AHCI drivers available for the majority of current OSes. RAID Mode provides host based RAID support on the onboard SATA ports. RAID levels supported and required drivers depend on the RAID stack selected Back to [Mass Storage Controller Configuration Screen] - Back to [Screen Map] 2. AHCI Capable RAID Options Option Values: Intel(R) ESRT2 (LSI*) Intel(R) RSTe Help Text: - Intel(R) ESRT2 (Powered By LSI*): Supports RAID 0/1/10 and optional RAID 5 with Intel® RAID C600 Upgrade Keys. Uses Intel ESRT2 drivers (based on LSI* MegaSR). - Intel(R) RSTe: Provides pass-through drive support. Also provides host based RAID 0/1/10/5 support. Uses Intel(R) RSTe iastor drivers. Comments: This option only appears when the SATA Controller is enabled, and RAID Mode has been selected as the operational SATA Mode. This setting selects the RAID stack to be used for SATA RAID with the onboard AHCI SATA controller. If a RAID Volume has not previously been created that is compatible with the RAID stack selected, it will be necessary to Save and Exit and reboot in order to create a RAID Volume. Note: This option does not appear on all boards. Back to [Mass Storage Controller Configuration Screen] - Back to [Screen Map] 3. Intel(R) Storage Module Option Values: None Names of Storage Modules supported at this time are: Intel(R) Integrated RAID Module Intel(R) Integrated RAID Module RMS25PB040 Intel(R) Integrated RAID Module RMT3PB080 Intel(R) Integrated RAID Module RMS25CB080 Intel(R) Integrated RAID Module RMS25CB040 Intel(R) Integrated RAID Module RMT3CB080 Intel(R) Integrated RAID Module RMS25JB080 Intel(R) Integrated RAID Module RMS25JB040 Intel(R) Integrated RAID Module RMS25KB080 Intel(R) Integrated RAID Module RMS25KB040 Help Text: Comments: Information only. If no Intel® Storage Module is detected, then None is displayed. This shows the customer the product name of the module installed, which helps in identifying drivers, support, documentation, and so on. Back to [Mass Storage Controller Configuration Screen] - Back to [Screen Map] 4. SATA Port (For Port numbers 0-6) Option Values: Not Installed 76 Intel® Server System P4000RP Family Service Guide