Intel P4304BT Quick Installation User's Guide - Page 8

General Installation Process 9 Install Front Bezel Assembly A Engage three plastic bezel hooks into the raised metal slots at the chassis edge. Keep the right edge of front bezel align tightly with the right edge of the Chassis. B Rotate the bezel assembly toward the chassis and latch the two plastic tabs on the left side of the bezel assembly to the chassis. 10 Install Side Cover A Slide the chassis cover on the chassis. B Secure the chassis cover with the screws . CAUTION: This chassis must be operated with the SIDE COVERS installed to ensure proper cooling. BA A B A B A B 11 Finishing Up 1. See your Intel® Server Board Quick Start User's Guide to connect your keyboard, mouse, video, and other I/O cables. 2. Connect the AC power cable last. CAUTION: power supply requires a 16-gauge power cord. I/O Connections AC Power 12 Install Software • BIOS, Drivers, and Operating System Install A. Confirm BIOS Version: Look on the Server/System Management screen in the BIOS Setup Utility to determine the installed BIOS version. Compare this to the versions at: http://www.intel.com/support If new versions are available, update the BIOS on your server. See the User Guide on the Intel® Server Deployment Toolkit CD for update instructions. B. Configure your RAID Controller: Use the instructions provided with the RAID controller. C. Install your Operating System: Use the instructions provided with the RAID controller and with the operating system. D. Install Operating System Drivers: With the operating system running, insert the Intel® Server Deployment Toolkit CD. If using a Microsoft* Windows* operating system, the Express Installer will autorun and allow you to select the appropriate drivers to install. On other operating systems, browse the CD folders to locate and install the driver files. 4