Intel RCS25ZB040LX Hardware User Guide - Page 21

- A CDROM drive containing Intel® RAID SSD Cache Controller RCS25ZB040/RCS25ZB040LX drivers for supported operating systems, RAID configuration utilities, an electronic version of this user's guide, and links to other related documentation - A license agreement - Warranty information 2. Prepare the server. Turn off the power to the server, and disconnect the AC power cord. Remove the server cover. Refer to the server documentation for instructions. Before you install the card, make sure that the computer is disconnected from the power and from any networks. 3. Open the cabinet. Follow the instructions in the server technical documentation. 4. If required, replace the mounting bracket (server dependent) and install light pipe in the Life (upper) position. 5. If required, install optional SuperCap and external LED before installing the card in the PCIe slot. 6. Insert the Intel® RAID SSD Cache Controller RCS25ZB040/RCS25ZB040LX card. Locate an empty PCIe slot that offers the maximum airflow. Remove the blank bracket panel on the server chassis that aligns with the empty PCIe slot. Save the bracket screw, if applicable. Align the card to a PCIe slot. Press down gently, but firmly, to correctly seat the card in the slot. Secure the bracket to the computer chassis with the bracket screw. The following figure illustrates the installation of a Intel® RAID SSD Cache Controller RCS25ZB040/RCS25ZB040LX in a PCI Express* slot. Note: Some PCIe slots support PCIe graphics cards only; if a Intel® RAID SSD Cache Controller RCS25ZB040/RCS25ZB040LX is installed on those PCIe slots, it will not function. Intel® RAID SSD Cache Controller RCS25ZB040/RCS25ZB040LX User Guide 11