Intel RS3DC040 Hardware User Guide - Page 25
Example of the Intel, RAID Controller RS3DC080 Installation in a, PCIe Slot
View all Intel RS3DC040 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
function. Refer to the guide for your motherboard for information about the PCIe slot. Figure 3. Example of the Intel® RAID Controller RS3DC080 Installation in a PCIe Slot Bracket Screw Press Here Press Here 3_01495-01 PCIe Slot Edge of Motherboard 5. Configure and install the SAS devices, the SATA devices, or both in the host computer case. Refer to the documentation for the devices for any pre-installation configuration requirements. 6. Connect the RAID controller to the devices. Use SAS cables to connect SAS devices, SATA devices, or both to the 12Gb/s Intel® RAID Controller. See SAS Device Cables and Connectors for SAS cable and connector information. See Connecting a RAID Controller with Internal Port Connectors by Cable to Internal Drives for information about connecting the controller to the drives. The maximum cable length is 10 meters (393.37 in.). You can connect one device per SAS PHY unless you use an expander. 12Gb/s Intel® RAID Controllers User Guide 15