Intel RS3SC008 Hardware user guide - Page 26
Detailed Installation for 12Gb/s Intel® RAID Modules
View all Intel RS3SC008 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Detailed Installation for 12Gb/s Intel® RAID Modules This section provides detailed instructions on how to install your 12Gb/s Intel® RAID Module. The figures in this section show the installation of the Intel® RAID Module RMS3HC080 in the Mezzanine port. You can install the Intel® RAID Module RMS3CC080 in the same way. 1. Unpack the 12Gb/s Intel® RAID Module. Unpack and remove your RAID module. Inspect it for damage. If it appears damaged, contact your Intel Customer and Technical Support representative. 2. Turn off the power to the system. Turn off the power to the computer, and disconnect the AC power cord. Remove the computer cover. Refer to the system documentation for instructions. Caution: Before you install the module, make sure that the computer is disconnected from the power and from any networks. 3. Install the barrel standoff. a. Locate the matching SAS module connector on your server board. See your server board documentation. b. Insert the barrel standoffs into the matching holes in the server board. Figure 4. Install the Barrel Standoff AF006560 19 12Gb/s Intel® RAID Controllers User Guide