Intel RS3UC080 User Guide - Page 33
Selecting a Boot Disk, SAS Topology
View all Intel RS3UC080 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Selecting a Boot Disk You can select a boot disk in the SAS Topology window. The next time you boot the computer, the firmware moves this disk to scan ID 0, making it the new boot disk. This feature makes it easier to set BIOS boot device options and to keep the boot device constant during device additions and removals. You can also select an alternative boot device. If the BIOS cannot find the preferred boot device when it loads, it attempts to boot from the alternative device. Follow these steps to select a boot disk: 1. In the SAS3 BIOS CU, select an adapter from the adapter list. 2. Select the SAS Topology option. If a device is currently designated as the boot device, the Device Info column on the SAS Topology window lists the word Boot, as shown in the following figure. Figure 7. Boot Device on SAS Topology Window If a device is currently designated as the alternative boot device, the Device Info column shows the word Alt. 3. To select the preferred boot disk, move the cursor to the disk, and press Alt + B. 4. To remove the boot designator, move the cursor to the current boot disk, and press Alt + B. This controller no longer has a disk designated as boot. Intel® Integrated RAID Solution User Guide 23