Intel S2400EP Technical Product Specification - Page 51

Product Architecture Overview Intel® Server Board S2400EP TPS  BMC LAN channel 1 MAC address = NIC1 MAC address + 2  BMC LAN channel 2 MAC address = NIC1 MAC address + 3  BMC LAN channel 3 (RMM4) MAC address = NIC1 MAC address + 4 The printed MAC address on the server board and/or server system is assigned to NIC1 on the server board. 3.3.5 Embedded Serial ATA (SATA)/Serial Attached SCSI (SAS)/RAID Support Integrated on the server board is an Intel® C600-A chipset that provides embedded storage support by two integrated controllers: AHCI and SCU. The standard server board (with no additional storage options installed) will support up to six SATA ports:  Two 6 Gb/sec SATA port routed from the AHCI controller to two white 7-pin SATA port labeled "SATA-1" on the server board.  Four 3 Gb/sec SATA ports routed from the SCU controller to the multi-port mini-SAS connector labeled "SCU_0". Note: The mini-SAS connector labeled "SCU_1 (4-7)" is NOT functional by default and is only enabled with the addition of an Intel® RAID C600 Upgrade Key option supporting eight SAS/SATA ports. The server board is capable of supporting additional chipset embedded SAS, SATA, and RAID options when configured with one of several available Intel® RAID C600 Upgrade Keys. Upgrade keys install onto a 4-pin connector on the server board labeled "STOR_UPG_KEY". Figure 21.Intel® RAID C600 Upgrade Key Connector The following table identifies available upgrade key options and their supported features. 38 Revision 1.1 Intel order number G50763-003