Intel S2400EP Technical Product Specification - Page 46
Storage Controller Options Overview
View all Intel S2400EP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Intel® Server System R1000EP Product Family TPS Storage Control Options Overview 6. Storage Controller Options Overview The server platform supports many different embedded and add-in SATA/SAS controller and SAS Expander options to provide a large number of possible storage configurations. This section will provide an overview of the different options available. 6.1 Embedded SATA/SAS Controller support Integrated on the server board is an Intel® C602 chipset that provides embedded storage support through two integrated controllers: AHCI and SCU. The standard server board (with no additional storage options installed) will support up to six SATA ports: Two 6 Gb/sec SATA port routed from the AHCI controller to two white 7-pin SATA ports labeled "SATA_0" and "SATA_1" on the server board. One onboard I/O SAS Module connector. Four 3 Gb/sec SAS/SATA ports routed from the SCU controller to the multi-port mini- SAS connector labeled "SCU_0". Note: The mini-SAS connector labeled "SCU_1" is NOT functional by default and is only enabled with the addition of an Intel® RAID C600 Upgrade Key option supporting eight SAS/SATA ports. With the addition of one of several available Intel® RAID C600 Upgrade Keys, the system is capable of supporting additional embedded SATA, SAS, and software RAID options. Upgrade keys install onto a 4-pin connector on the server board labeled "STOR_UPG_KEY". Figure 37. Intel® RAID C600 Upgrade Key Connector The following table identifies available upgrade key options and their supported features. Revision 1.1 37 Intel Order Number G67599-001