Intel S2400SC Specification update - Page 3

Monthly Specification Update Enterprise Platforms and Services Marketing Contents Preface...1 1. Nomenclature...1 2. Product Scope...1 Summary Tables of Changes 2 Errata ...4 1. Linux* Operating Systems are not supported on RSTe mode 4 2. UEFI Windows Server 2008* R2 SP1 installation on SCU ports may fail under RSTe RAID mode ...4 3. UEFI Operating System installation is not supported on ESRT2 mode 4 4. HDD status LEDs do not function under specific configuration 5 5. RSTe GUI installation may fail if there are no devices attached to any onboard AHCI ports 5 6. BMC continuously sends RAID volume rebuild event in RSTe mode of the SCU controller 5 7. System may halt under specific BIOS configurations 5 8. Microsoft Windows 2003* x86 installation failure under Pass-through mode of SCU controller 6 9. System may halt under unsupported configuration in ESRT2 mode 6 10. reset Extra events may be seen in the System Event Log (SEL) during system global 6 11. System may continuously report a faulty or assert/deassert log when having blank HDD carriers or un-configured HDDs 7 12. Integrated BMC Web Console - Power Statistics page - Minimum wattage reads as zero. 7 13. Integrated BMC Web Console - Power Control page - Perform Action button not functional. 7 14. IPMI Get Chassis Status command returns incorrect Chassis Identify State. .........8 15. The BIOS and ME Firmware can't be updated successfully via Intel® One Boot Flash Update Utility(OFU) under SuSE Linux Enterprise Server 11* (64-bit) with SP2 8 16. BMC continuously sends HDD assert/de-assert event during HDD RAID rebuild under ESRT2 mode of the SCU controller 8 17. High CPU utilization may occur when installing or running Microsoft* Windows* Server 2008 R2 or Microsoft* Windows* 7 with default NIC driver 9 Documentation Changes ...10 III