Intel SBT2 Product Guide - Page 45
Running the SSU Remotely via an Emergency Management Card, Starting the SSU, From the Boot Menu - driver
UPC - 735858140096
View all Intel SBT2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Running the SSU Remotely via an Emergency Management Card Using graphical hardware redirection via the emergency management card 2, you can see the SSU Console in VGA graphics mode, control the mouse, and control the keyboard from a local system connected to a remote server by a network or modem. The emergency management card 2 provides video memory, keyboard, and mouse redirection support. Video memory and user input are sent to a remote location through either a modem or Ethernet link and displayed by the Remote Control console. This solution requires an emergency management card 2 card installed in the remote server and the Remote Control software available on the local system. The SSU will execute exclusively on the remote server. Any files required for the SSU to execute must be on the remote server. Starting the SSU SSU consists of a collection of task oriented modules plugged into a common framework called the Application Framework (AF). The Application Framework provides a launching point for individual tasks and a location for setting customization information. For full functionality the SSU requires the availability of the AF.INI, AF.HLP, plus any .ADN files and their associated .HLP and .INI files. 1. Turn on your video monitor and your system. 2. There are two ways to start the SSU. a. After creating set of three SSU diskettes from the CD: Insert the first SSU diskette in drive A, and press the reset button or to reboot your server from the diskette. Insert the second diskette when prompted. b. Directly from the Server Resource CD: Insert the Server Resource CD into your CD ROM drive and press the reset button or to reboot. When prompted to do so, press to enter BIOS Setup. From the Boot Menu, select the Boot Device Priority option and then select CD-ROM as your primary boot device. Save those settings and exit BIOS Setup. The server will boot from the CD-ROM and display a menu of options. Follow the instructions in the menu to start the SSU. 3. When the SSU title appears on the screen, press to continue. 4. The mouse driver loads if it is available; press to continue. 5. This message appears: Please wait while the Application Framework loads.... 6. When the main window of the SSU appears, you can customize the user interface before continuing. SBT2 Server Board Product Guide 45