Intel SC5650BCDP S5500BC_SR1630BC_SC5650BCDP_MSU_2011_09. - Page 12
Excessive Time to Enter or Exit EFI Shell When AHCI is Enabled in BIOS
View all Intel SC5650BCDP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Enterprise Platforms and Services Marketing Status Workaround This issue was fixed with BMC 00.36. None Monthly Specification Update 8. BIOS setup may report an incorrect firmware version Problem The BIOS setup screens to display the versions of SDR and ME firmware version may report an incorrect version. The version displayed may be of the previously installed versions. Implication After firmware update, the BIOS screens may not show the correct version until the system is AC cycled. Status This issue may be fixed in a future BMC release. Workaround None. 9. Excessive Time to Enter or Exit EFI Shell When AHCI is Enabled in BIOS Revision R0037 Problem If AHCI is enabled in BIOS setup, it will take the user approximately 3 or more minutes to enter the EFI shell from BIOS Setup and approximately 3 or more minutes to exit the EFI shell. Implication Users should expect long delays when entering the EFI shell from BIOS setup if AHCI is also enabled. Status This issue may be fixed in a future BIOS revision. Workaround None 10. Must use software package with BIOS36/FW36/FRUSDR13 or later when using 4GB memory modules in the SR1630BC Problem The system fans in the SR1630BC do not adequately cool the system when populated with 4GB memory modules Implication Users can experience the system to blue screen Status This issue can be fixed by installing FRUSDR 13 or later. Workaround None 6