Intel SR1500NA SR1500 Chassis TPS - Page 60
PCI Riser Cards and Assembly
UPC - 735858183383
View all Intel SR1500NA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
PCI Riser Cards and Assembly Intel® Server System SR1500AL TPS 8. PCI Riser Cards and Assembly The Intel® Server Board S5000PAL provides two PCI riser slots, one supporting a low profile add-in card riser, and the other used for full height add-in card risers. The riser cards for these slots are not interchangeable due to their orientation on the board and connector differences. The low profile riser slot is only capable of supporting a riser using PCI Express* cards. The full height riser slot is capable of supporting risers that follow either the PCI-X* or PCI Express* specifications. The riser assembly for the server chassis is tool-less. Stand-offs allow the riser cards to slide onto the assembly where a latching mechanism holds each riser in place. Holding down the latch releases the risers for easy removal. When re-inserting the riser assembly into the chassis, tabs on the back of the assembly should be aligned with slots on the back edge of the chassis. The tabs fit into the slots securing the riser assembly to the chassis when the top cover is in place. The riser assembly provides two extraction levers to assist with riser assembly removal from the riser slots. Figure 31. PCI Riser Card Assembly - FH View TP02188 48 Revision 1.4 Intel order number D31981-008