Intel SR1520MLNA Product Specification - Page 11
Server Board, Hard Drive and Peripheral Bays - motherboard
![]() |
UPC - 735858197434
View all Intel SR1520MLNA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Intel® Server System SR1520ML Introduction The I/O connector locations on the back of the system are pre-cut, so an I/O shield is not required. The EMI gasket is pre-installed to maintain electromagnetic interference (EMI) compliance levels. The layout is shown in figure 3. A B C D E C D E H G F H G F A AC Power Connector B AC Power Air Vent C PCI Express* Add-in Card Slot D NIC2 (10/100/1000 Mb) E NIC1 (10/100/1000 Mb) F USB Ports 0 - 1 G Serial Port (DB9) H Video Connector (VGA) Figure 3. Back Panel Features 1.4 Server Board The Intel® Server System SR1520ML includes two Intel® Server Boards X38ML. Each board can be independently controlled via separate front panel interfaces. The system operates as two physical nodes in a 1U form factor. The system comes with two PCI Express* riser cards, each supporting a single x1, x4, x8 or x16 adapter. For more information on the Intel® Server Board X38ML see the server board TPS at: http://support.intel.com/support/motherboards/server/x38ml 1.5 Hard Drive and Peripheral Bays The server system supports up to two fixed 2.5-inch SATA hard drives. One Intel® Z-U130 Value Solid State Drive per board may also be installed. The Intel® Z-U130 Value Solid State Drive enables fast boot ability with customizable BIOS payloads. See section 4.2 for more details. Note: There are no optical or floppy drive bays available in the system although both devices are supported via external USB connection. Revision 1.0 3
![](/manual_guide/products/intel-sr1520mlna-product-specification-f2c71c9/11.png)