Intel SR1530SH User Guide - Page 41
Hardware Installations and Upgrades, Before You Begin, Tools and Supplies Needed, System References
UPC - 735858197502
View all Intel SR1530SH manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
3 Hardware Installations and Upgrades Caution: No components in the Intel® Server System SR1530SH/SR1530HSH are hot-swappable. Before removing or installing any component in this server system, you must first take the server out of service, turn off all peripheral devices connected to the system, turn off the system by pressing the power button, and unplug the AC power cord from the system or wall outlet. Note: Some components in the Intel® Server System SR1530HSH are hot-swappable and are noted as such (where applicable) in the following instructions. Note: Most of the illustrations in this chapter show the Intel® Server System SR1530SH with an optional optical drive installed. Unless otherwise noted, the instructions for removing and installing components are the same for the Intel® Server System SR1530HSH. When instructions differ, separate illustrations are shown for the Intel® Server System SR1530HSH. Before You Begin Before working with your server product, pay close attention to the "Safety Information" on page iii. Tools and Supplies Needed • Phillips* (cross head) screwdriver, #1 bit and #2 bit • Antistatic wrist strap and conductive foam pad (recommended) System References All references to the left, right, front, top, and bottom assume the reader is facing the front of the server system as it would be positioned for normal operation. Intel® Server System SR1530SH/SR1530HSH User's Guide 21