Intel SRCSAS144E Hardware Guide - Page 16
Installation, Inserting the Intel, RAID Controller SRCSAS144E into a PCI, Express* Slot - bracket
UPC - 735858182621
View all Intel SRCSAS144E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Installation 1. Power off the computer and all drives, enclosures, and system components. Remove the power cord from the computer. 2. Remove the chassis cover and access the PCI Express add-in card slots. See your server chassis documentation for instructions. 3. Align the controller's connector with a x4 or x8 PCI Express* slot on the server board. 4. Press down gently but firmly to ensure that the card is properly seated in the slot, as shown in Figure 1. Secure the bracket to the computer chassis. AF000645 Figure 1. Inserting the Intel® RAID Controller SRCSAS144E into a PCI Express* Slot 5. Connect the provided internal and/or external cables into the adapter using the 4-port combined end. Make sure the controller and cables are properly attached. - If using an external cable, plug the cable into the connector in the end bracket. - If using an internal cable, plug the cable into connector at the inside edge of the adapter. 7 Intel® RAID Controller SRCSAS144E Hardware Guide