Intel SRCU32 User Guide - Page 51
Installing the Operating System, Installing Windows with Installation Boot Diskettes
View all Intel SRCU32 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Installing the Operating System The following installation procedures highlight the Windows setup options that you must install to successfully prepare the operating system for the installation of the RAID Software Suite. ✏ NOTE For detailed Windows installation procedures, please consult the documentation that came with the computer system or operating system. Install the operating system software using one of the scenarios (boot diskettes or CD-ROM) below that matches the installation method. Installing Windows with Installation Boot Diskettes 1. Boot from the Windows Installation diskettes to setup Windows. 2. Insert boot diskettes and power up the system. 3. During install let Windows detect the storage devices in the system. 4. When device detection is complete, if the hard drive controller is not detected and listed, press to specify additional storage devices and install the driver. 5. Continue with the Windows installation. 6. After the operating system is completely installed, go to Chapter 7, Loading StorCon to complete the installation. Installing Windows Using the Bootable Windows CD-ROM ✏ NOTE If the driver for the hard drive controller is on the Windows CD-ROM, then follow prompts and continue at Chapter 7, Loading StorCon. If you are installing a driver that does not come with the Windows installation CD-ROM, for example, the Intel RAID Controller SRCU32 driver created in Chapter 2, then follow the procedure below. 1. Insert the CD-ROM and power up the system. If the drivers for the hard drive controller are not on the bootable Windows CD-ROM, press as soon as the initial blue screen appears to ensure that the driver diskette can be loaded. 2. When device detection is complete, press to specify additional storage devices and then select "Other." Insert the Intel RAID Controller SRCU32 diskette into the floppy drive and continue the installation (see the next section). Installing Microsoft Windows NT or Windows 2000 51