Intel SSR212MA User Guide - Page 52

Installing an Intel® RAID Controller SRCS28X

Get Intel SSR212MA PDF manuals and user guides View all Intel SSR212MA manuals
Add to My Manuals
Save this manual to your list of manuals

Page 52 highlights

Hardware Installations and Upgrades Installing an Intel® RAID Controller SRCS28X Caution: Before performing any maintenance on the system, back up the data. Follow the instructions in the Intel® Storage System Software User Manual for shutting down the system. Caution: Refer to the support site at http://www.intel.com/support/motherboards/server/ssr212ma for the appropriate firmware version to use. 1. Observe all safety and ESD precautions listed in Appendix D, "Safety Information". 2. Turn off all peripheral devices connected to the storage system. Turn off the storage system. 3. Disconnect the AC power cord(s). 4. Remove the enclosure cover. For instructions, see "Removing the Enclosure Cover" on page 15. 5. Remove the PCI riser assembly. For instructions, see "Removing the PCI Riser Assembly" on page 23. 6. Unpack the Intel® RAID Controller SRCS28X. Remove the Intel® RAID Controller SRCS28X from the anti-static bag and inspect for damage. Contact Intel or your Intel support representative if the Intel® RAID Controller SRCS28X appears damaged. 7. Configure the jumper settings on the Intel® RAID Controller SRCS28X using the jumper definitions and locations in the documentation that shipped with the card. 8. Connect the extended battery cable to the battery backup unit. TP02339 Figure 34. Connecting Extended Battery Cable to Battery Backup Unit 34 Intel® Storage System SSR212MA User Guide

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
Hardware Installations and Upgrades
34
Intel® Storage System SSR212MA User Guide
Installing an Intel
®
RAID Controller SRCS28X
Caution:
Before performing any maintenance on the system, back up the data. Follow the
instructions in the Intel® Storage System Software User Manual for shutting down the
system.
Caution:
for the appropriate firmware version to use.
1.
Observe all safety and ESD precautions listed in
Appendix D, “Safety Information”
.
2.
Turn off all peripheral devices connected to the storage system. Turn off the storage
system.
3.
Disconnect the AC power cord(s).
4.
Remove the enclosure cover. For instructions, see
“Removing the Enclosure Cover”
on page 15
.
5.
Remove the PCI riser assembly. For instructions, see
“Removing the PCI Riser
Assembly” on page 23
.
6.
Unpack the Intel
®
RAID Controller SRCS28X. Remove the Intel
®
RAID Controller
SRCS28X from the anti-static bag and inspect for damage. Contact Intel or your Intel
support representative if the Intel
®
RAID Controller SRCS28X appears damaged.
7.
Configure the jumper settings on the Intel
®
RAID Controller SRCS28X using the
jumper definitions and locations in the documentation that shipped with the card.
8.
Connect the extended battery cable to the battery backup unit.
Figure 34.
Connecting Extended Battery Cable to Battery Backup Unit
TP02339