Intermec CN51 CN51 Battery Instructions (Model 1015AB01)

1015AB01

CN51 Battery Instructions

You need to fully charge the battery before using it in your CN51

Mobile Computer. You can charge batteries after a partial discharge

without affecting the original battery capacity. A battery typically

charges in 4 hours or less. A fully discharged battery may require up to

6 hours to recharge.

Use only charger Models AC21 or AD27 for direct charging of the

battery pack. When the battery is installed in the CN51, use only these

Intermec charging accessories:

y

Model 1015AA01

y

Model 1015AA02

y

Model 1015AV01

y

Model AD23

y

Model AD24

y

Model AD27

y

Model AE36

y

Model AE37

For more information about these charging accessories, see the

instructions that ship with the accessory.

Specifications

Design and speciﬁcations are subject to change without notice.

Physical Specifications

Product:

Intermec Li-ion battery (Model 1015AB01)

Dimensions:

78 x 71 x 15 mm (3.1 x 2.8 x 0.6 in)

Weight:

67 g (2.4 oz)

Capacity and Output Specifications

Maximum output:

x

4.2 V

Nominal output:

x

3.7 V

Capacity:

1950 mAh (7.2 Wh)

Temperature and Humidity Specifications

Operating temperature:

-20 °C to 60 °C (-4 °F to 140 °F)

Charging temperature:

0 °C to 45 °C (32 °F to 113 °F)

Storage temperature:

-20 °C to 60 °C (-4 °F to 140 °F)

Relative humidity:

5% to 95% non-condensing

Important Recommendations

y

Charge the battery immediately before use or within a

couple of days of use.

y

Do not short circuit the battery, and keep it away from

metallic items.

y

Do not drop the battery or apply mechanical shocks or

pressure to it.

y

Discarded batteries may create a safety hazard. Before

disposal, cover the battery connector with electrical

insulating tape.

y

Do not disassemble or dispose of in ﬁre.

y

Do not store the battery at temperatures above 60 °C

(140 °F), such as inside a car on a hot day or in direct

sunlight, as this may damage the battery.

y

Do not immerse the battery in water or get the battery wet.

y

Do not solder directly to the battery contacts.

y

Use the Intermec battery 1015AB01 only with a CN51.

Use of

this battery in other devices could result in

damage to the device or battery.

y

For maximum battery life, the temperature range for

charging batteries is 0 °C to 45 °C (32 °F to 113 °F).

Worldwide Headquarters

6001 36th Avenue West

Everett, Washington 98203

U.S.A.

tel

425.348.2600

fax 425.355.9551

www.intermec.com

© 2013 Intermec Technologies

Corporation. All rights reserved.

CN51 Battery (1015AB01) Instructions

*943-396-001*°

P/N 943-396-001

Proper Disposal of Waste Batteries

Some of the substances necessary for the proper functioning of

batteries are considered harmful to the environment and to human

health. It is therefore important that those substances be kept out of

the environment.

You play an important role in the protection of the environment:

1.

Keep all waste batteries out of unsorted trash.

2.

Dispose of all waste batteries in separate collection for

treatment and recycling.

Please contact Intermec for the collection option(s) available in your

location.

Marking of the battery:

1.

The wheeled-bin symbol indicates the requirement for separate

collection of the battery.

2.

Two letters shown underneath the wheeled bin indicate the

presence of a certain substance:

a.

Hg means Mercury is present

b.

Cd means Cadmium is present

c.

Pb means Lead is present

3.

The Moebius loop (chasing arrows) indicates that the battery

is recyclable.

Intermec CN51 CN51 Battery Instructions (Model 1015AB01)

Intermec CN51 Manual

Intermec CN51 manual content summary: