Intermec CN51 CN51 Battery Instructions (Model 1015AB01) - Page 1
Intermec CN51 Manual
View all Intermec CN51 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
Specifications Design and specifications are subject to change without notice. Intermec Li-ion battery (Model 1015AB01) Physical Specifications Dimensions: 78 x 71 x 15 mm (3.1 x 2.8 x 0.6 in) 67 g (2.4 oz) Capacity and Output Specifications 1950 mAh (7.2 Wh) Temperature and Humidity Specifications Maximum output: x 4.2 V Nominal output: x 3.7 V Operating temperature: -20 °C to 60 °C (-4 °F to 140 °F) Charging temperature: 0 °C to 45 °C (32 °F to 113 °F) Storage temperature: -20 °C to 60 °C (-4 °F to 140 °F) 5% to 95% non-condensing Proper Disposal of Waste Batteries Some of the substances necessary for the proper functioning of batteries are considered harmful to the environment and to human health. It is therefore important that those substances be kept out of the environment. You play an important role in the protection of the environment: 1. Keep all waste batteries out of unsorted trash. 2. Dispose of all waste batteries in separate collection for treatment and recycling. Please contact Intermec for the collection option(s) available in your location. Marking of the battery: 1. The wheeled-bin symbol indicates the requirement for separate collection of the battery. 2. Two letters shown underneath the wheeled bin indicate the presence of a certain substance: a. Hg means Mercury is present b. Cd means Cadmium is present c. Pb means Lead is present 3. The Moebius loop (chasing arrows) indicates that the battery is recyclable. Worldwide Headquarters 6001 36th Avenue West Everett, Washington 98203 U.S.A. tel 425.348.2600 fax 425.355.9551 www.intermec.com © 2013 Intermec Technologies Corporation. All rights reserved. CN51 Battery (1015AB01) Instructions *943-396-001* P/N 943-396-001 Product : Weight : Capacity : Relative humidity: Important Recommendations yy Charge the battery immediately before use or within a couple of days of use. yy Do not short circuit the battery, and keep it away from metallic items. yy Do not drop the battery or apply mechanical shocks or pressure to it. yy Discarded batteries may create a safety hazard. Before disposal, cover the battery connector with electrical insulating tape. yy Do not disassemble or dispose of in fire. yy Do not store the battery at temperatures above 60 °C (140 °F), such as inside a car on a hot day or in direct sunlight, as this may damage the battery. yy Do not immerse the battery in water or get the battery wet. yy Do not solder directly to the battery contacts. yy Use the Intermec battery 1015AB01 only with a CN51. Use of this battery in other devices could result in damage to the device or battery. yy For maximum battery life, the temperature range for charging batteries is 0 °C to 45 °C (32 °F to 113 °F). 1015AB01 CN51 Battery Instructions You need to fully charge the battery before using it in your CN51 Mobile Computer. You can charge batteries after a partial discharge without affecting the original battery capacity. A battery typically charges in 4 hours or less. A fully discharged battery may require up to 6 hours to recharge. Use only charger Models AC21 or AD27 for direct charging of the battery pack. When the battery is installed in the CN51, use only these Intermec charging accessories: yy Model 1015AA01 yy Model 1015AA02 yy Model 1015AV01 yy Model AD23 yy Model AD24 yy Model AD27 yy Model AE36 yy Model AE37 For more information about these charging accessories, see the instructions that ship with the accessory.