Intermec PA30 PA30 Print Engine User's Manual - Page 79
Print Engine Settings Descriptions, Configuring Print Engine and Media Settings
View all Intermec PA30 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
Chapter 4 - Configuring Print Engine and Media Settings 3 Enter values in the entry fields, or choose settings from the drop-down lists. For more information, see the next table. 4 Click Submit Setup. The changes are saved. Print Engine Settings Descriptions Setting STARTADJ (Start Adjust) STOPADJ (Stop Adjust) HEAD RESIST PRINT SPEED CLIP DEFAULT Description Amount of media (in dots) that is either fed out or pulled back before printing begins. A positive Start Adjust value feeds media out and a negative value pulls media back. Default is 0. Amount of media (in dots) that is fed out or pulled back after printing is completed. A positive Stop Adjust value increases the normal media feed and a negative Stop Adjust value decreases the normal media feed. Default is 0. (Read-only) Head resistance value for the installed printhead. Sets the desired printing speed in inches per second (ips). Set the print speed to a value appropriate for your media. For more information, see "Media Type Settings" on page 71. Enables or disables printing of partial fields. Partial fields are print fields that have been configured larger than the print window and will be truncated if Clip Default is enabled. PA30 Print Engine User's Manual 65