Intermec PB22 Media Core Installation Instructions - Page 1

Media Core Installation Instructions The PB22 and PB32 printers support the use of media that have a core with an inside diameter of 19.05 mm (0.75 inch) and 10.16 mm (0.4 inch). Printers are shipped with a 19.05 mm media core installed. If you are using media with an inside diameter of 10.16 mm, you will need change to this new media core. You will find the following items in the shipping box: • Two 10.16 mm (0.4 inch) media cores • These installation instructions To install the optional media core 1 Remove the self-tapping screw using a Torx T10 driver. 2 Remove the manual lock.