Intermec PB51 PB50 and PB51 Vehicle Cradle Installation Guide - Page 6
same time as the serial port in the printer. Doing so will
View all Intermec PB51 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
7 Push in on the blue lever to lock the PB50 or PB51 into the vehicle cradle. 8 Attach the power cord to the connector on the side of the vehicle cradle. 9 Connect the other end of the power cord to your vehicle. Caution: Do not use the serial port in the vehicle dock at the same time as the serial port in the printer. Doing so will result in corrupted data. Please use only one or the other. 6
6
7
Push in on the blue lever to lock the PB50 or PB51 into the
vehicle cradle.
8
Attach the power cord to the connector on the side of the
vehicle cradle.
9
Connect the other end of the power cord to your vehicle.
Caution: Do not use the serial port in the vehicle dock at the
same time as the serial port in the printer. Doing so will
result in corrupted data. Please use only one or the other.