Intermec PC43d 1012AB01 Battery Instructions

1012AB01 Battery Instructions

*943-323-001*

P/N 943-323-001

Specifications

Design and speciﬁcations are subject to change without notice.

Physical Specifications

Product:

Intermec 1012AB01 Rechargeable Li-ion battery

Dimensions:

160 x 52 x 37 mm (6.30 x 2.05 x 1.46 in)

Weight:

440 g (15.5 oz)

Capacity and Output Specifications

Nominal output:

x

14.4 V

Capacity:

5200 mAh (74.88 Wh)

Temperature and Humidity Specifications

Operating temperature:

-20°C to 60°C (-4°F to 140°F)

Charging temperature:

0°C to 45°C (32°F to 113°F)

Storage temperature:

For up to 1 week

-20°C to 50°C (-4°F to 122°F)

For up to 1 month

-20°C to 45°C (-4°F to 113°F)

For up to 1 year

-20°C to 20°C (-4°F to 68°F)

Relative humidity:

0% to 95% non-condensing

Caution: This battery pack may ignite, create a chemical burn hazard, explode, or

release toxic materials if mistreated. Do not incinerate, disassemble, or heat above

100°C (212°F). Do not short circuit; may cause burns. Keep away from children. Use

only Intermec charger Model INBB01. Use of incorrect charger may present a risk of

ﬁre or explosion.

CONTAINS LITHIUM-ION BATTERY. WASTE BATTERY MUST

PROMPTLY BE RECYCLED OR DISPOSED OF PROPERLY. SEE INSTRUCTIONS.

Proper Disposal of Waste Batteries

Some of the substances necessary for the proper functioning of batteries are considered harmful to the

environment and to human health. It is therefore important that those substances be kept out of the

environment.

You play an important role in the protection of the environment:

1.

Keep all waste batteries out of unsorted trash.

2.

Dispose of all waste batteries in separate collection for treatment and recycling.

Please contact Intermec for the collection option(s) available in your location.

Marking of the battery:

1.

The wheeled-bin symbol indicates the requirement for separate collection of the battery.

2.

Two letters shown underneath the wheeled bin indicate the presence of a certain substance:

a.

Hg means Mercury is present

b.

Cd means Cadmium is present

c.

Pb means Lead is present

3.

The Moebius loop (chasing arrows) indicates that the battery is recyclable.

Worldwide Headquarters

6001 36th Avenue West

Everett, Washington 98203

U.S.A.

tel

425.348.2600

fax 425.355.9551

www.intermec.com

© 2011 Intermec Technologies

Corporation. All rights reserved.

Important Recommendations

y

Charge the battery before use.

y

See “Charging the Battery” for approved charging methods. Use of this

battery in other devices could result in damage to the device or battery.

y

The temperature range for charging batteries is 0°C to 45°C (32°F to

113°F). Do not charge battery packs outside this range. For maximum

battery life, charge batteries at 23°C (73°F).

y

Do not store the battery at temperatures above 50°C (122°F), such

as inside a car on a hot day or in direct sunlight, as this may damage

the battery.

y

Battery usage by children should be supervised

.

y

Do not disassemble or open, crush, bend or deform, puncture, shred, or

burn.

y

Do not modify the battery or attempt to insert foreign objects into the

battery.

y

Do not solder directly to the battery contacts.

y

Do not immerse the battery in water.

y

Do not short circuit the battery. Keep the battery connector away from

metallic items.

y

Do not apply mechanical shocks or pressure to the battery.

y

Avoid dropping the battery or the printer. If you suspect that the

battery or printer is damaged, send it to an Intermec service center

for inspection.

y

Replace battery only with another Model 1012AB01 battery.

These batteries have been tested in accordance with applicable safety

standards. Contact your Intermec sales representative or distributor if

this battery is no longer available.

y

Discarded batteries may create a safety hazard. Before disposal,

cover the battery connector with electrical insulating tape.

1012AB01

PC43d Battery Instructions

Using the Battery

The Model 1012AB01 battery is a rechargeable lithium-ion

battery designed for use in the Battery Base accessory for the

PC43d Desktop Printer.

Charging the Battery

You can charge the 1012AB01 battery with this accessory:

y

INBB01 Battery Base

Before you use the PC43d with the Battery Base, you need to

fully charge the battery in the Battery Base. You can charge a

battery after partial discharge without affecting the original

battery capacity. The maximum charging time for a fully

discharged battery is 4 hours. It may take less time to charge

the battery depending on the battery charge level.

Intermec PC43d 1012AB01 Battery Instructions

Intermec PC43d Manual

Intermec PC43d manual content summary: