Intermec PC43d 1012AB01 Battery Instructions - Page 1

Intermec PC43d Manual

Get Intermec PC43d PDF manuals and user guides View all Intermec PC43d manuals
Add to My Manuals
Save this manual to your list of manuals

Page 1 highlights

Design and specifications are subject to change without notice. Intermec 1012AB01 Rechargeable Li-ion battery 160 x 52 x 37 mm (6.30 x 2.05 x 1.46 in) 440 g (15.5 oz) Specifications Physical Specifications Capacity and Output Specifications Nominal output: x 14.4 V 5200 mAh (74.88 Wh) Temperature and Humidity Specifications Operating temperature: -20°C to 60°C (-4°F to 140°F) Charging temperature: 0°C to 45°C (32°F to 113°F) -20°C to 50°C (-4°F to 122°F) For up to 1 month -20°C to 45°C (-4°F to 113°F) -20°C to 20°C (-4°F to 68°F) 0% to 95% non-condensing Caution: This battery pack may ignite, create a chemical burn hazard, explode, or release toxic materials if mistreated. Do not incinerate, disassemble, or heat above 100°C (212°F). Do not short circuit; may cause burns. Keep away from children. Use only Intermec charger Model INBB01. Use of incorrect charger may present a risk of fire or explosion. CONTAINS LITHIUM-ION BATTERY. WASTE BATTERY MUST PROMPTLY BE RECYCLED OR DISPOSED OF PROPERLY. SEE INSTRUCTIONS. Proper Disposal of Waste Batteries Some of the substances necessary for the proper functioning of batteries are considered harmful to the environment and to human health. It is therefore important that those substances be kept out of the environment. You play an important role in the protection of the environment: 1. Keep all waste batteries out of unsorted trash. 2. Dispose of all waste batteries in separate collection for treatment and recycling. Please contact Intermec for the collection option(s) available in your location. Marking of the battery: 1. The wheeled-bin symbol indicates the requirement for separate collection of the battery. 2. Two letters shown underneath the wheeled bin indicate the presence of a certain substance: a. Hg means Mercury is present b. Cd means Cadmium is present c. Pb means Lead is present 3. The Moebius loop (chasing arrows) indicates that the battery is recyclable. Worldwide Headquarters 6001 36th Avenue West Everett, Washington 98203 U.S.A. tel 425.348.2600 fax 425.355.9551 www.intermec.com © 2011 Intermec Technologies Corporation. All rights reserved. 1012AB01 Battery Instructions *943-323-001* P/N 943-323-001 Product : Dimensions: Storage temperature: For up to 1 week For up to 1 year Weight : Capacity : Relative humidity: Important Recommendations y Charge the battery before use. y See "Charging the Battery" for approved charging methods. Use of this battery in other devices could result in damage to the device or battery. y The temperature range for charging batteries is 0°C to 45°C (32°F to 113°F). Do not charge battery packs outside this range. For maximum battery life, charge batteries at 23°C (73°F). y Do not store the battery at temperatures above 50°C (122°F), such as inside a car on a hot day or in direct sunlight, as this may damage the battery. y Battery usage by children should be supervised. y Do not disassemble or open, crush, bend or deform, puncture, shred, or burn. y Do not modify the battery or attempt to insert foreign objects into the battery. y Do not solder directly to the battery contacts. y Do not immerse the battery in water. y Do not short circuit the battery. Keep the battery connector away from metallic items. y Do not apply mechanical shocks or pressure to the battery. y Avoid dropping the battery or the printer. If you suspect that the battery or printer is damaged, send it to an Intermec service center for inspection. y Replace battery only with another Model 1012AB01 battery. These batteries have been tested in accordance with applicable safety standards. Contact your Intermec sales representative or distributor if this battery is no longer available. y Discarded batteries may create a safety hazard. Before disposal, cover the battery connector with electrical insulating tape. 1012AB01 PC43d Battery Instructions Using the Battery The Model 1012AB01 battery is a rechargeable lithium-ion battery designed for use in the Battery Base accessory for the PC43d Desktop Printer. Charging the Battery You can charge the 1012AB01 battery with this accessory: y INBB01 Battery Base Before you use the PC43d with the Battery Base, you need to fully charge the battery in the Battery Base. You can charge a battery after partial discharge without affecting the original battery capacity. The maximum charging time for a fully discharged battery is 4 hours. It may take less time to charge the battery depending on the battery charge level.

  • 1
  • 2
1012AB01 Battery Instructions
*943-323-001*
P/N 943-323-001
Specifications
Design and specifications are subject to change without notice.
Physical Specifications
Product:
Intermec 1012AB01 Rechargeable Li-ion battery
Dimensions:
160 x 52 x 37 mm (6.30 x 2.05 x 1.46 in)
Weight:
440 g (15.5 oz)
Capacity and Output Specifications
Nominal output:
x
14.4 V
Capacity:
5200 mAh (74.88 Wh)
Temperature and Humidity Specifications
Operating temperature:
-20°C to 60°C (-4°F to 140°F)
Charging temperature:
0°C to 45°C (32°F to 113°F)
Storage temperature:
For up to 1 week
-20°C to 50°C (-4°F to 122°F)
For up to 1 month
-20°C to 45°C (-4°F to 113°F)
For up to 1 year
-20°C to 20°C (-4°F to 68°F)
Relative humidity:
0% to 95% non-condensing
Caution: This battery pack may ignite, create a chemical burn hazard, explode, or
release toxic materials if mistreated. Do not incinerate, disassemble, or heat above
100°C (212°F). Do not short circuit; may cause burns. Keep away from children. Use
only Intermec charger Model INBB01. Use of incorrect charger may present a risk of
fire or explosion.
CONTAINS LITHIUM-ION BATTERY. WASTE BATTERY MUST
PROMPTLY BE RECYCLED OR DISPOSED OF PROPERLY. SEE INSTRUCTIONS.
Proper Disposal of Waste Batteries
Some of the substances necessary for the proper functioning of batteries are considered harmful to the
environment and to human health. It is therefore important that those substances be kept out of the
environment.
You play an important role in the protection of the environment:
1.
Keep all waste batteries out of unsorted trash.
2.
Dispose of all waste batteries in separate collection for treatment and recycling.
Please contact Intermec for the collection option(s) available in your location.
Marking of the battery:
1.
The wheeled-bin symbol indicates the requirement for separate collection of the battery.
2.
Two letters shown underneath the wheeled bin indicate the presence of a certain substance:
a.
Hg means Mercury is present
b.
Cd means Cadmium is present
c.
Pb means Lead is present
3.
The Moebius loop (chasing arrows) indicates that the battery is recyclable.
Worldwide Headquarters
6001 36th Avenue West
Everett, Washington 98203
U.S.A.
tel
425.348.2600
fax 425.355.9551
www.intermec.com
© 2011 Intermec Technologies
Corporation. All rights reserved.
Important Recommendations
y
Charge the battery before use.
y
See “Charging the Battery” for approved charging methods. Use of this
battery in other devices could result in damage to the device or battery.
y
The temperature range for charging batteries is 0°C to 45°C (32°F to
113°F). Do not charge battery packs outside this range. For maximum
battery life, charge batteries at 23°C (73°F).
y
Do not store the battery at temperatures above 50°C (122°F), such
as inside a car on a hot day or in direct sunlight, as this may damage
the battery.
y
Battery usage by children should be supervised
.
y
Do not disassemble or open, crush, bend or deform, puncture, shred, or
burn.
y
Do not modify the battery or attempt to insert foreign objects into the
battery.
y
Do not solder directly to the battery contacts.
y
Do not immerse the battery in water.
y
Do not short circuit the battery. Keep the battery connector away from
metallic items.
y
Do not apply mechanical shocks or pressure to the battery.
y
Avoid dropping the battery or the printer. If you suspect that the
battery or printer is damaged, send it to an Intermec service center
for inspection.
y
Replace battery only with another Model 1012AB01 battery.
These batteries have been tested in accordance with applicable safety
standards. Contact your Intermec sales representative or distributor if
this battery is no longer available.
y
Discarded batteries may create a safety hazard. Before disposal,
cover the battery connector with electrical insulating tape.
1012AB01
PC43d Battery Instructions
Using the Battery
The Model 1012AB01 battery is a rechargeable lithium-ion
battery designed for use in the Battery Base accessory for the
PC43d Desktop Printer.
Charging the Battery
You can charge the 1012AB01 battery with this accessory:
y
INBB01 Battery Base
Before you use the PC43d with the Battery Base, you need to
fully charge the battery in the Battery Base. You can charge a
battery after partial discharge without affecting the original
battery capacity. The maximum charging time for a fully
discharged battery is 4 hours. It may take less time to charge
the battery depending on the battery charge level.