Intermec PW50 Model AB27 Battery Instructions - Page 1

Design and specifications are subject to change without notice. Intermec AB27 Rechargeable Li-ion battery 74 x 44 x 23 mm (2.9 x 1.7 x 0.9 in) 111 g (3.9 oz) Specifications Physical Specifications Capacity and Output Specifications Nominal output: x 7.4 V 2300 mAh (18 Wh) Temperature and Humidity Specifications Operating temperature: -20°C to 60°C (-4°F to 140°F) Charging temperature: 0°C to 45°C (32°F to 113°F) -20°C to 50°C (-4°F to 122°F) For up to 1 month -20°C to 45°C (-4°F to 113°F) -20°C to 35°C (-4°F to 95°F) 0% to 85% non-condensing Caution: This battery pack may ignite, create a chemical burn hazard, explode, or release toxic materials if mistreated. Do not incinerate, disassemble, or heat above 100°C (212°F). Do not short circuit; may cause burns. Keep away from children. Use only Intermec charger Model AC18. Use of incorrect charger may present a risk of fire or explosion. CONTAINS LITHIUM-ION BATTERY. WASTE BATTERY MUST PROMPTLY BE RECYCLED OR DISPOSED OF PROPERLY. SEE INSTRUCTIONS. Proper Disposal of Waste Batteries Some of the substances necessary for the proper functioning of batteries are considered harmful to the environment and to human health. It is therefore important that those substances be kept out of the environment. You play an important role in the protection of the environment: 1. Keep all waste batteries out of unsorted trash. 2. Dispose of all waste batteries in separate collection for treatment and recycling. Please contact Intermec for the collection option(s) available in your location. Marking of the battery: 1. The wheeled-bin symbol indicates the requirement for separate collection of the battery. 2. Two letters shown underneath the wheeled bin indicate the presence of a certain substance: a. Hg means Mercury is present b. Cd means Cadmium is present c. Pb means Lead is present 3. The Moebius loop (chasing arrows) indicates that the battery is recyclable. Worldwide Headquarters 6001 36th Avenue West Everett, Washington 98203 U.S.A. tel 425.348.2600 fax 425.355.9551 www.intermec.com © 2011 Intermec Technologies Corporation. All rights reserved. AB27 Battery Instructions *943-220-002* P/N 943-220-002 Product : Dimensions: Storage temperature: For up to 1 week For up to 1 year Weight : Capacity : Relative humidity: Important Recommendations  Charge the battery before use.  See "Charging the Battery" for approved charging methods. Use of this battery in other devices could result in damage to the device or battery.  The temperature range for charging batteries is 0°C to 45°C (32°F to 113°F). Do not charge battery packs outside this range. For maximum battery life, charge batteries at 23°C (73°F).  Do not store the battery at temperatures above 50°C (122°F), such as inside a car on a hot day or in direct sunlight, as this may damage the battery.  Battery usage by children should be supervised.  Do not disassemble or open, crush, bend or deform, puncture, shred, or burn.  Do not modify the battery or attempt to insert foreign objects into the battery.  Do not solder directly to the battery contacts.  Do not immerse the battery in water.  Do not short circuit the battery. Keep the battery connector away from metallic items.  Do not apply mechanical shocks or pressure to the battery.  Avoid dropping the battery or the printer. If you suspect that the battery or printer is damaged, send it to an Intermec service center for inspection.  Replace battery only with another Model AB27 battery. These batteries have been tested in accordance with applicable safety standards. Contact your Intermec sales representative or distributor if this battery is no longer available.  Discarded batteries may create a safety hazard. Before disposal, cover the battery connector with electrical insulating tape. AB27 Battery Instructions Using the Battery The Model AB27 battery (P/N 318-030-xxx) is a rechargeable lithiumion battery designed for use in the PB21, PB22, PB31, and PB32 mobile printers. Charging the Battery You need to full charge the battery before using it in your Intermec printer. You can charge a battery after partial discharge without affecting the original battery capacity. Maximum charging times for a fully discharged battery are shown below. It may take less time to charge the battery depending on the battery charge level. You can charge a AB27 battery using the following methods: Charging Method AC18 4-Bay Battery Charger PB21, PB22, PB31, PB32 printers Charging Time 4 hours 4 hours