Intermec PX4i PX4i and PX6i Print Kit Integration Guide - Page 18
Brace, Break Shaft, Stepper Motor, PX4i and PX6i Print Kit Integration Guide - printer driver
View all Intermec PX4i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Brace The brace (P/N 1-040317-xx) slides onto the liner takeup unit and adds additional support for liner cores that are too large for the takeup hub. Brace Brace Break Shaft The break shaft (P/N 1-040258-xx) keeps the rewound media away from other nearby components. Use the supplied M4 x 8 mm Torx screw to mount the break shaft on your printer chassis. Break Shaft Stepper Motor The stepper motor (P/N 1-040960-9xx) uses a pair of belts (supplied) to drive the liner takeup unit and the liner drive roller in the print mechanism. Use four M4 x 8 mm Torx screws (supplied) to install the stepper motor on the motor mount. The motor connects to P11 on the driver board. 18 PX4i and PX6i Print Kit Integration Guide
18
PX4i and PX6i Print Kit Integration Guide
Brace
The brace (P/N 1-040317-xx) slides onto the liner takeup unit and
adds additional support for liner cores that are too large for the
takeup hub.
Brace
Break Shaft
The break shaft (P/N 1-040258-xx) keeps the rewound media away
from other nearby components. Use the supplied M4 x 8 mm Torx
screw to mount the break shaft on your printer chassis.
Break Shaft
Stepper Motor
The stepper motor (P/N 1-040960-9xx) uses a pair of belts (supplied)
to drive the liner takeup unit and the liner drive roller in the print
mechanism. Use four M4 x 8 mm Torx screws (supplied) to install the
stepper motor on the motor mount.
The motor connects to P11 on the driver board.
Brace