Invacare 4V86FLR Owners Manual - Page 29
Service
View all Invacare 4V86FLR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Invacare ® Veranda™ 3000/4000 5 Service 5.1 Adjusting Footplate Height This procedure applies to the swingaway front riggings and swingaway elevating legrest. 1. Remove the threaded handle A and hex screw B securing the foot plate tube C to the front rigging D. 2. Adjust the footrest B to the desired height. 3. Using the threaded handle and the hex screw, secure the foot plate tube to the front rigging. Securely tighten threaded handle. 4. If necessary, repeat STEPS 1-3 to adjust remaining footrest. D C A B 5.2 Installing/Removing the Heel Loop This procedure applies to the swingaway front riggings and swingaway elevating legrest. Reverse this procedure to remove the heel loop. 1. Wrap heel loop strap A around lower footrest B. 2. Attach hook portion of the heel loop strap to the loop portion of the heel loop strap. 3. Using the mounting screw C mounting pin D and nut E, secure the heel loop strap to the rear edge of the footplate F 4. Repeat STEPS 1-3 to install the remaining heel loop. C D B F A E 28 1567855-C