Invacare 9153637778 Owners Manual - Page 38
Replacing Heel Loop, Footplates with, Spring Buttons
View all Invacare 9153637778 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
5 FRONT RIGGINGS 5.3 Replacing Heel Loop 1. Pull the cam lock lever up to unlocked position. 2. Push in the release buttons and remove the footplate assembly from the front rigging support. 3. Remove the mounting screw, spacer and locknut that secure the heel loop to the footplate. 4. Remove existing heel loop from slide tube. 5. Install new heel loop onto slide tube. 6. Install the mounting screw, spacer and locknut to secure the heel loop to the footplate. Tighten until the spacer is secure. 7. Insert the lower footrest assembly into the upper footrest assembly to desired height. 8. Ensure that the release buttons fully protrude from holes on both sides of the upper footrest support. 9. Rotate cam lock lever down to locked position. Footplates with Spring Buttons Adjustment Holes Cam Lock Lever Swingaway footrest shown. Front Rigging Support Release Button Footplate Assembly Mounting Screw Spacer Locknut FIGURE 4 Replacing Heel Loop Cam Lock Lever Heel Loop Slide Tube Footplate Assembly Footplate Invacare® Tracer® SX5 Wheelchair 38 Part No. 1110550